CBC DR-Series User Manual

DR-Series DVR4 / 8 / 16 Channel Stand-AloneDIGITAL VIDEO RECORDERUSER’S MANUAL

93. Front Panel(4CH) • Power Button is Soft Style to Prevent System Failure by Wrong Operation.• Channel Selection Button is Prior to SCR Mode.• When

104. Rear Panel(4CH) • When System Installation, Please Install under System Power Off Status.• Please Use Specific Adaptor when Power Supply.Tip2 4 7

11• There are buttons on the controller that are unused, and their descriptions have been omitted.• Every Button on the controller will function the s

121. System Power ON• Press Power Button to Startup the DVR.• After the Power-On Self-Test, the system will ask the user to input a password to begin

133. Display Mode• User can select from a variety of multi-screen Display Modes (1ch, 4ch, 6ch, 8ch, 9ch, 13ch, 16ch)• The initial Display Mode is se

143. Display• Each PTZ function is manipulated by using a button on the Front Panel or on the Remote Controller. • Some of the notations on the P

152004/01/01 00:00:00>⊙ Go to Search Mode• Press Search Button and Log-In as Administrator or Manager.• Use Directional Keys to Navigate Search

16• Video Playback Controls① : Basic Playback Mode (Normal Speed (1x) Forward Playing)② : Normal Speed (1x) Backward Playing ③ : Pause Playback (enab

17⊙ Go to Menu① Press the SETUP Button.② Unit will ask for Login/Password Entry.③ Input Password Using by Channel Selection Buttons.④ After Login, Sel

185. Menu1. Display - Allows Configuration of Display Properties• Status Bar : Recording Mode Icon (On/Off) (Recording:

1• INDEX• CHAPTER 1. Specifications & System Organization1. Specifications ------------------------------------------------------------ 32. Pro

195. Menu• Activation : Activation On/Off• List : Sequence Title• Created By: User who programmed the sequence1-3. SEQUENCE• Choose Add to Add a New

20① Press enter then red border line disappear. Setup mode activated.② Select display mode among 16 mode. 1set can be made by 16 mode.③ Display mode s

212. Camera - Allows Setup of Camera Parameters and Options2-1. Camera Title5. Menu• Covert : Set Channel as Covert Channel (On/Off)(When a channel

225. Menu※ How to use the Virtual Keyboard• Use the directional buttons to select keys on the Virtual Keyboard• Press ENTER to press a key on the key

235. Menu2-4. Motion Detection• Move Cursor over grid using the Directional Keys.• Press ENTER, and then use the Directional Keys to select an area

245. Menu3. Sound3-1. Audio- Allows for configuration of Audio parameters and options• Live Audio : Audio Output to Audio Out Terminal (ON/OFF)(Liv

255. Menu• Time Zone Setup : Choose the Time Zone (relative to GMT standard).※ How to perform Date/Time Setup via Network (NTP) Time Server:1. Set th

265. Menu4-2. Network• IP Address : Input the unit IP Address• Gateway : Input the IP Address of Internet-Connected Router• Subnet Mask : Input the

275. Menu4-3. MailThese settings allow the DVR to send outgoing E-Mail Notifications to the list of recipients listed within the DVR.• Server: Setup

285. Menu4-4. User ManagementDVR User Account Setup• There are 3 groups of User Account types:- Administrator, Manager, and User• A total of 7 users

2• INDEX• CHAPTER 5. MENU⊙ Go to Menu -------------------------------------------------------------- 17⊙ Go to System Setup -------------------

295. Menu4-5. System Information• S/W Version: DVR Firmware Version• H/W Version : DVR Hardware Version• Video Signal Type: NTSC or PAL• Disk Cap

305. Menu5. Event/Sensor5-1. HDD Event• Drive: All HDDs are listed by IDE Channel Number.• Smart Alarm: Set Temperature Alarm (On/Off).• Check Inte

315. Menu5-2. Alarm Input5-3. Alarm Out※ Configure the DVR Alarm Relay Output for each channel to trigger relay output on alarm activations, video

325. Menu5-4. Buzzer Out• Operation: Buzzer Out (Enable/Disable).• Mode: Setup in Latched/Transparent Mode (same as Alarm Out).• HDD Event: Turn Buz

335. Menu5-5. E-Mail Notification• Disk Overwrite : (ON/OFF) Overwrite Permission (when HDD is full)ON: Overwrite HDD, starting with the oldest data

345. Menu⊙ Go to Record Menu1. Recording Operations• Schedule Mode: Choose ‘DAILY’ or ‘WEEKLY’.- Daily : The recording schedule that you configure w

355. Menu2. Continuous / Motion Record Schedule2-1. Parameter2-2. Schedule• Select a block of time from the 0-24hr Timeline (you may select multip

365. Menu3. Alarm Recording Schedule3-1. Parameter3-2. Schedule• Alarm Recording Icon• Select a block of time from the 0-24hr Timeline (you may se

374. Panic Setup5. Menu• To setup each channel, press enter. • Setup each channel. (Size, FPS, Quality, Audio)• By panic button of front panel, can re

385. Menu⊙ Go to Archiving① Device : Choose from available media. (CD-R/W and/or USB Memory Stick are detected automatically.)② From : Select the St

3Video standard PAL/NTSCAudio 2-way Audio conferenceMonitor display Real time:25 Fps (PAL), 30Fps(NTSC) per cameraCovert camera operation Programmable

39② Close All Running Software and Press Next to Move Next Step.6. Client• Minimum and Recommended System Requirements for a Client PC① Main Board (C

406. Client④ The Remote Agent software files will be copied onto your PC, with a status bar showing the progress.③ Choose the Folder where the Remote

416. Client1. Introduction③① Main Display : Shows single or multi-channel view of cameras connected to the DVR.② Camera Selection Buttons : Indicates

42①②③④⑤6. Client① List of DVRs and DVR Groups② DVR Information : Enter DVR Name, IP, Port, User ID, Password③ Camera Position : Set camera positions

432-2. Add Group① At ‘site’ of left upper side, right click the “Add Group”.② Input the Group name.②①6. Client

44③ Input DVR information.(name, IP, port, ID, PW)③④④ Set camera position, check option and press ‘ADD’6. Client

45⑤ New DVR list is shown on the left upper side.⑤6. Client

462-3. Configuration① Video OSD : Select screen information. (title, name, date, time)② Video output : Select video output method.- Overlay Mixer : Ou

47• Record Operations- Schedule Mode: Weekly or Daily. (When weekly mode, setup each day.)- Pre Event Recording Time: When event happen, record imag

482. Camera • Status/Title Setup- Setup for Each Camera (Covert function On/Off, Camera Name). • Color Setup- Setup Color for Each Screen.• Covert/PTZ

4Pre-alarm recording Up to 5 sec., programmable per cameraHousing Steel metal, Front Plastic MoldOSD languagesEnglish, Spanish, Chinese, Dutch, Portug

492-4. Event/sensor• Alarm Input- Setup for Each Channel Alarm Connection & Type.• Alarm Out- Setup each channel when alarm, videoloss, motion are

502-5. System• System Info- Possible to Watch DVR System Status. •SMTP- Setup the mail server and user’s E-mail.•Users- Setup the Users.- Click the “

51• Select I/D to Connect Server.• I/D can be Add, Change, and Delete at Setup. • 1*1 View : Showing One (1) Video which User Selected. (Selection Vid

526. Client3-3. PTZ Control• PTZ Controller : Use the directional buttons to control camera Pan, Tilt, and Zoom functions• FOCUS/ZOOM : Select Focus

53①② ③ ④⑤⑥⑦6. Client• Click AVI Conversion Button to Begin AVI File Conversion.• During AVI Conversion, a message is displayed. • Click ‘Stop” to Sto

54①③④⑥⑦⑧②⑤6. Client4. Search4-1. Introduction① Search Screen : View Playback of Selected Video② Search Bar/Timeline : Search Recorded Video on Timel

55①②③4-2. Search Method④⑤⑥⑦6. Client① Indicates the Time of Day (0 ~ 24 hours) on Search Timeline.② Indicates Recording Mode (Blue : No Recording, R

56①Archive②Backup Play⑤Log Viewer⑥Event Viewer③Save Image④Print① Archive – Backup Image from Server to Remote PC.6. Client4-3. SEARCH Options• Time

57② Backup Play (DVR Player) – Transfer to DVR Player①②③⑤④6. Client① Video Display (Single-Channel Mode available only)② Open Backup File for Viewing

586. Client③ Save Image – Capture Image and Save to Local PC• Click ‘Save Image’ Icon during Video Playback.• Chose Filename and File Type (JPG, BMP)

5DR-Series DVR8 / 16 Channel Stand-AloneDIGITAL VIDEO RECORDERRevision Date : 09.20.2006Firmware Version : 5.7.6.100USER’S MANUAL2. Product Contents

59①②③④ ⑤ ⑥⑦⑧⑨⑩⑪6. Client⑤ Log Viewer – Find Video from the DVR Event Log.① Select Starting Date/Time and Ending Date/Time from which to search for Ev

60①② ③ ④⑤⑥6. Client⑥ Event Viewer - Showing Present Event in Server & Find Image① Indicates the order in which events occurred.② Indicates the DV

616. Client5. Web Client• WEB Client Connection① Input the IP Address or URL of the DVR in the Internet Explorer Address Bar.② A dialog will appear

626. Client

63. System Organization1. Specifications & OrganizationNETWORKCamera #1-16Alarm Sensor #1-16Remote Client PCVideo InVideo OutRelay OutVCRVGA Mon

7① Power : System Power On/Off ② DISPLAY : Select Screen Division Mode or Rotation Mode③ SEQUENCE : Select Sequence Screen Mode④ PANIC : Trigger Panic

8• When System Installation, Please Install under System Power Off Status.• Please Use Specific Adaptor when Power Supply.2. Rear Panel(8&16CH)2.